Eagle Eye Security Systems LLC
605-762-3423
Wireless Rubber Hose Alert 3000 WRH-3000 Wireless Rubber Hose Alert $ 169.99
The WRH-3000 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the WR-3000 receiver up to 3,000 feet away*. The transmitter is weatherproof and meant for exterior locations. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a diff erent tone at the receiver. The WR-3000 is the receiver for the WRH-3000 system. The WR-3000 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four diff erent tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level. The WR-3000 is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.
Wireless Rubber Hose Alert 3000 Extra Transmitter WHT-3000 Extra Rubber Hose Transmitter $ 99.99
Extra wireless transmitters can be used in other locations; for example, 2 driveways. Comes complete with transmitter and 25 feet of Hose.
Wireless WR3000 Extra Receiver WR-3000 Extra Wireless Receiver $ 79.99
The WR-3000 is the receiver for All 3000 Series systems. The WR-3000 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one or four different tones(Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level.
The WR-3000 is equipped with four form "C" relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC trminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.